Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight on a Yamaha XSR 900?

Model: Yamaha Xsr 900
Part: Headlight

Video tutorial

In this tutorial, you will learn how to replace the front headlight on a Yamaha XSR 900, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety.

Start by positioning yourself in front of the motorcycle, then locate the two screws on either side of the headlight and remove them using a 4 mm hex key. Next, separate the headlamp from the base, disconnect the power connector, and remove the rubber cover.

At this point, you can proceed with replacing the damaged component, whether it is the bulb or the entire unit.


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the Yamaha XSR 900?
How do you replace the exhaust pipe of the Yamaha XSR 900?
Xsr 900 To replace the exhaust of the Yamaha XSR 900, you need to loosen the screws that secure the exhaust terminal to its housing: this will be located on …
How to Replace the Brake Pads on a Yamaha XSR 900
How to Replace the Brake Pads on a Yamaha XSR 900
Xsr 900 To replace the brake pads on a Yamaha XSR 900, you must perform the same procedure for both the front and rear wheels: loosen the bolts that secure t…
How do you replace the motor oil of the Yamaha XSR 900?
How do you replace the motor oil of the Yamaha XSR 900?
Xsr 900 To replace the motor oil of the Yamaha XSR 900, you need to disconnect the drain plug located in the central lower part of the oil pan: this will all…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos