Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To change the engine oil on a Yamaha Ténéré 700, loosen the screws securing the engine guard located at the front bottom of the bike: once removed, you can access the components underneath. Here you will find the oil drain plug, which must be unscrewed while collecting all the oil in a container; above the drain plug, there will also be the oil filter, which can be removed and replaced with a new one. After covering everything with the engine guard, you can top up by inserting oil into the hole in the crankcase on the right side of the vehicle.

Updated on 30 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to change the engine oil on a Yamaha Tenere 700
How to change the engine oil on a Yamaha Tenere 700
Tenere 700 The procedure for changing the engine oil and oil filter on the Yamaha Tenere 700 is quite simple. First, place the bike on its centre stand and star…
How to change the engine oil in the Yamaha Tenere 700?
How to change the engine oil in the Yamaha Tenere 700?
Tenere 700 In this tutorial, you will see how to change the engine oil in the Yamaha Tenere 700, a very simple and quick operation. First, ensure that the engin…
How to replace the engine oil in the Yamaha Tenere 700?
How to replace the engine oil in the Yamaha Tenere 700?
Tenere 700 In this tutorial, we can see how to replace the engine oil in the Yamaha Tenere 700, an extremely simple and quick operation. First, let's make sure …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos