Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the Yamaha Tenere 700?

Model: Yamaha Tenere 700
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in the Yamaha Tenere 700, a very simple and quick operation. First, ensure that the engine is cool enough for safety, then remove the relevant lower cover and position a container underneath the bike.

Next, locate the drain hole bolt, unscrew it using a 17mm socket, and let all the oil in the system drain out. After that, simply unscrew the old filter, tighten the new one, reassemble everything, and add the necessary amount of oil through the designated upper hole.


Posted on 6 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Yamaha Ténéré 700
How to Change the Engine Oil on a Yamaha Ténéré 700
Tenere 700 To replace the engine oil on the Yamaha Ténéré 700, loosen the screws securing the engine guard located at the bottom front of the bike: once removed…
How to Change the Engine Oil on a Yamaha Ténéré 700
How to Change the Engine Oil on a Yamaha Ténéré 700
Tenere 700 To change the engine oil on a Yamaha Ténéré 700, loosen the screws securing the engine guard located at the front bottom of the bike: once removed, y…
How to change the engine oil on a Yamaha Tenere 700
How to change the engine oil on a Yamaha Tenere 700
Tenere 700 The procedure for changing the engine oil and oil filter on the Yamaha Tenere 700 is quite simple. First, place the bike on its centre stand and star…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos