Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the engine oil on the Yamaha Ténéré 700, loosen the screws securing the engine guard located at the bottom front of the bike: once removed, you can access the components underneath. Here you will find the drain plug, which must be unscrewed while collecting all the oil in a container; above the drain plug, you will also find the oil filter, which can be removed and replaced with a new one. After covering everything with the engine guard, top up by pouring oil into the hole in the crankcase located on the left side of the bike.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Yamaha Tenere 700?
How to replace the engine oil in the Yamaha Tenere 700?
Tenere 700 In this tutorial, we can see how to replace the engine oil in the Yamaha Tenere 700, an extremely simple and quick operation. First, let's make sure …
How to change the engine oil in the Yamaha Tenere 700?
How to change the engine oil in the Yamaha Tenere 700?
Tenere 700 In this tutorial, you will see how to change the engine oil in the Yamaha Tenere 700, a very simple and quick operation. First, ensure that the engin…
How to change the engine oil on a Yamaha Tenere 700
How to change the engine oil on a Yamaha Tenere 700
Tenere 700 The procedure for changing the engine oil and oil filter on the Yamaha Tenere 700 is quite simple. First, place the bike on its centre stand and star…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos