Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the engine oil in the Yamaha Tenere 700?

Model: Yamaha Tenere 700
Part: Engine oil

Video tutorial

In this tutorial, we can see how to replace the engine oil in the Yamaha Tenere 700, an extremely simple and quick operation. First, let's make sure that the engine is cool enough, after which we will remove the lower protective cover and open the filler cap. Next, we position a container underneath the bike, unscrew the drain bolt using a 17mm socket wrench, and let all the oil contained in the system drain out. At this point, all that remains is to unscrew the old filter, tighten both the replacement and the bolt, and add the new oil through the designated hole.


Posted on 21 January 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the Yamaha Tenere 700?
How to change the engine oil in the Yamaha Tenere 700?
Tenere 700 In this tutorial, you will see how to change the engine oil in the Yamaha Tenere 700, a very simple and quick operation. First, ensure that the engin…
How to change the engine oil on a Yamaha Tenere 700
How to change the engine oil on a Yamaha Tenere 700
Tenere 700 The procedure for changing the engine oil and oil filter on the Yamaha Tenere 700 is quite simple. First, place the bike on its centre stand and star…
How to replace the rear brake pads on a Yamaha Ténéré 700?
How to replace the rear brake pads on a Yamaha Ténéré 700?
Tenere 700 To replace the rear brake pads on a Yamaha Ténéré 700, you need to unscrew the bolt that secures the brake caliper to the disc corresponding to the p…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos