Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Husqvarna Svartpilen 250?

Model: Husqvarna Svartpilen 250
Part: Clock

Video tutorial

To set the clock on the Husqvarna Svartpilen 250, turn on the instrument panel by inserting the ignition key into the ignition switch: once the panel is on, press and hold the MODE and SET buttons located on either side of the instrument panel. While holding these two buttons, you will notice that the clock starts to flash: you can then repeatedly press the SET button to change the hours.

Now confirm by pressing the MODE button and then change the minutes in the same way.


Updated on 25 September 2026 by ScegliAuto


Related tutorials

How to adjust the time on the Husqvarna Svartpilen 250?
How to adjust the time on the Husqvarna Svartpilen 250?
Svartpilen 250 In this tutorial, we can see how to adjust the time on the Husqvarna Svartpilen 250, an extremely simple and quick operation to perform, for example,…
How to Replace the Clutch on a Husqvarna Svartpilen 250?
How to Replace the Clutch on a Husqvarna Svartpilen 250?
Svartpilen 250 To replace the clutch on the Husqvarna Svartpilen 250, loosen the screws securing the clutch cover on the right side of the bike. Once the cover is r…
How to Remove the Battery on the Husqvarna Svartpilen 250
How to Remove the Battery on the Husqvarna Svartpilen 250
Svartpilen 250 In today's tutorial, you will learn how to remove and replace the battery on a Husqvarna Svartpilen 250 motorcycle, following the instructions below.…

How to Replace the Shaft Seals on the GasGas EC 125?

To replace the shaft seals on the GasGas EC 125, loosen the nut that secures the sprocket, located on the left side of the bike. Once the sprocket is removed, moving the chain as well, you can locate the shaft seals positioned at the bottom of the sprocket. Using a tool like a screwdriver, pry out the old seals from their housing and replace them with new spare parts. After replacement, reinstall the sprocket and the corresponding chain, ensuring everything functions correctly.

Watch the video!


by ScegliAuto

More videos