Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Husqvarna
    3. : Svartpilen 250

Husqvarna Svartpilen 250 - Video guides

Husqvarna Svartpilen 250
How do you replace the air filter of the Husqvarna Svartpilen 401?
The air filter of the Husqvarna Svartpilen 401 can be replaced by loosening the screws that secure the seat of the motorcycle to its housing: these screws will …Read all…
Posted on 25 January 2026 by ScegliAuto
Husqvarna Svartpilen 250
How to adjust the time on the Husqvarna Svartpilen 250?
In this tutorial, we can see how to adjust the time on the Husqvarna Svartpilen 250, an extremely simple and quick operation to perform, for example, after …Read all…
Posted on 14 January 2026 by ScegliAuto
Husqvarna Svartpilen 250
Disassembly and replacement of the air filter of the Husqvarna Svartpilen 250.
Today we will discover the instructions that will allow us to disassemble and replace the air filter of the engine of the Husqvarna Svartpilen 250 motorcycle. …Read all…
Posted on 10 February 2025 by ScegliAuto
Husqvarna Svartpilen 250
How to Set the Clock on the Husqvarna Svartpilen 250?
To set the clock on the Husqvarna Svartpilen 250, turn on the instrument panel by inserting the ignition key into the ignition switch: once the panel is on, …Read all…
Posted on 25 September 2026 by ScegliAuto
Husqvarna Svartpilen 250
How to Remove the Battery on the Husqvarna Svartpilen 250
In today's tutorial, you will learn how to remove and replace the battery on a Husqvarna Svartpilen 250 motorcycle, following the instructions below. First, …Read all…
Posted on 31 May 2026 by ScegliAuto

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos