Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly and replacement of the air filter of the Husqvarna Svartpilen 250.

Model: Husqvarna Svartpilen 250
Part: Air filter

This video is currently unavailable

Today we will discover the instructions that will allow us to disassemble and replace the air filter of the engine of the Husqvarna Svartpilen 250 motorcycle. First of all, we put the motorcycle on the stand and start to disassemble and remove the fuel tank cover, also removing the driver's and passenger's seat; to do this, we will unscrew all the screws we find on the sides, as shown in the video.

At this point, we unscrew the screws of the filter box cover to remove the air filter cartridge, replacing it with the new one; insert it in the correct direction and reassemble all the components.


Posted on 10 February 2025 by ScegliAuto


Related tutorials

How to Replace the Clutch on a Husqvarna Svartpilen 250?
How to Replace the Clutch on a Husqvarna Svartpilen 250?
Svartpilen 250 To replace the clutch on the Husqvarna Svartpilen 250, loosen the screws securing the clutch cover on the right side of the bike. Once the cover is r…
How to Set the Clock on the Husqvarna Svartpilen 250?
How to Set the Clock on the Husqvarna Svartpilen 250?
Svartpilen 250 To set the clock on the Husqvarna Svartpilen 250, turn on the instrument panel by inserting the ignition key into the ignition switch: once the panel…
How do you replace the air filter of the Husqvarna Svartpilen 401?
How do you replace the air filter of the Husqvarna Svartpilen 401?
Svartpilen 250 The air filter of the Husqvarna Svartpilen 401 can be replaced by loosening the screws that secure the seat of the motorcycle to its housing: these s…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos