Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Xmax 125
Part: Battery

On this scooter model, the battery is installed directly behind the front shield. To recharge, check, or replace it, you must remove all the plastics surrounding it. The video illustrates the specific parts that need to be removed and where the screws are located. Once you reach the battery, disconnect the terminals starting with the negative to avoid accidents. To reconnect, always start with the positive terminal. After replacing it, put back the various screws and plastics that were removed.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery on a Yamaha Xmax 125
How to Replace the Battery on a Yamaha Xmax 125
Xmax 125 This brief video tutorial shows the steps necessary to replace the battery on a Yamaha Xmax 125. This is a very simple operation that you can carry o…
How to Replace the Battery in the Yamaha Xmax 125
How to Replace the Battery in the Yamaha Xmax 125
Xmax 125 The instructions in this guide will show you how to remove and replace the battery of the Yamaha Xmax 125 scooter. First, place the scooter on its st…
How do you replace the battery of the Yamaha Xmax 125?
How do you replace the battery of the Yamaha Xmax 125?
Xmax 125 It will be possible to replace the battery of the Yamaha Xmax 125 by loosening the screws that secure the windshield of the motorcycle to its housing…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos