Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on the Yamaha MT-07?

Model: Yamaha Mt 07
Part: Exhaust muffler

Video tutorial

To replace the exhaust on the Yamaha MT-07, loosen the bolts that secure it to the appropriate supports: these bolts are located at the bottom of the bike and must be completely removed to extract the exhaust. The exhaust must also be detached from the front of the exhaust pipe by loosening the fixing bolt that connects it to that pipe.

Once the exhaust is freed, you can remove it from its housing and replace it with a new one: the new exhaust must be connected with the corresponding ring and secured to its supports.


Updated on 6 September 2026 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the Yamaha MT-07?
How to Replace the Exhaust on the Yamaha MT-07?
Mt 07 You can replace the exhaust on the Yamaha MT-07 by loosening the bolts that secure the exhaust terminal to its housing, located at the bottom of the …
How to Replace the Engine Oil and Oil Filter on a Yamaha MT 07
How to Replace the Engine Oil and Oil Filter on a Yamaha MT 07
Mt 07 Replace the engine oil and oil filter as part of the routine maintenance service on your Yamaha MT 07 by following the instructions below. First, pla…
How to replace the spark plugs on the Yamaha MT 07
How to replace the spark plugs on the Yamaha MT 07
Mt 07 This guide shows you how to remove and replace the spark plugs in the engine of the Yamaha MT 07 motorcycle, following the instructions below. First,…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos