Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Pw50
Part: Engine oil

In this tutorial, you will learn how to change the oil in a Yamaha PW50, a very simple and quick task. First, ensure the engine is sufficiently cool for safety. Then, position a container underneath, open the upper fill cap, and using a 12mm socket, unscrew the drain bolt. Allow the oil in the system to drain out, reassemble everything, and add the required amount of oil through the designated hole. The manufacturer recommends using 10W-40 oil.

Updated on 8 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the clutch on the Yamaha PW50?
How to replace the clutch on the Yamaha PW50?
Pw50 To replace the clutch on the Yamaha PW50, loosen the screws that secure the circular cover located on the right side of the bike. Once the cover is r…
How to Replace the Air Filter on the Yamaha PW50?
How to Replace the Air Filter on the Yamaha PW50?
Pw50 As shown in this tutorial, replacing the air filter on the Yamaha PW50 is a very simple and quick task. Before proceeding, ensure the engine is compl…

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos