Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Fz6
Part: Clock

In this tutorial, you will learn how to set the time on a Yamaha FZ6, a very simple and quick operation to perform after disconnecting the battery or following a time change. Start by inserting the key and turning on the instrument panel; it is not necessary to start the engine. Then, press both buttons located to the right of the central display. Once the time starts to flash, adjust the minutes using the upper button, change the hour with the lower button, and save the setting by pressing both buttons down one last time.

Updated on 9 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Fz6 In this article, we will see through the support of the video how to adjust the time of the Yamaha Fz6. The procedure takes a short time to be carrie…
Fz6 In this tutorial, learn how to set the time on the Yamaha FZ6, a very simple and quick operation to perform after disconnecting the battery or when c…
Fz6 .. In this tutorial, we will see how to set the time on a Yamaha FZ6, a very simple and quick operation to perform, for example, after.. …

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos