Do it yourself
| ||||
|
Model: Yamaha Mt 09
In order to replace the exhaust pipe of the Yamaha MT-09, you need to loosen the screws that hold it in place, so that it can be removed from the corresponding supports; once the fixing screws have been removed, you can widen the ring that connects the exhaust pipe to the manifold. Once the old exhaust pipe has been removed from its housing, you can insert the new one and attach it to the corresponding supports: by connecting it to the manifold through its ring, you can check that everything works correctly.
Posted on 24 February 2024 by ScegliAuto
|
How do you replace the front headlight of the Husqvarna 701?The procedure for replacing the front headlight on the Husqvarna 701 involves loosening the four 30 torx screws located on the sides of the headlight, between the front wheel fork and the plastic panel. Once all the screws are loosened, it will be possible to remove the plastic front cover to which the headlight, containing the bulbs, is attached. It will be necessary to disconnect the connector and remove the old bulb from its housing. Then it will be possible to insert the new bulb into its proper seat and connect the connector. Finally, it will be necessary to reassemble the headlight assembly and secure the fairing. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.003
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |