Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Yamaha Grizzly
If on the central display of your Yamaha Grizzly (year 2016-2018) you see the wrong time and you are wondering how to manually change it, then all you have to do is read the following guide and follow the steps described. First of all, turn on the display and then simultaneously press the "Select" and "Reset" buttons located on the left side of the display. As soon as the time starts flashing, use the same buttons to change both the hours and minutes digits. Finally, turn off the display and the procedure is complete.

Posted on 17 April 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Time on a Yamaha Grizzly
How to Set the Time on a Yamaha Grizzly
(Various brands) Various In this guide dedicated to your Yamaha Grizzly, you will learn how to quickly and manually adjust the time displayed on the instrument panel. Once yo…
How to set the time on the Yamaha R3?
How to set the time on the Yamaha R3?
Yamaha R3 In this tutorial we can see how to adjust the time on the Yamaha R3, an extremely simple and quick operation, to be carried out for example after dis…
How to Adjust the Time on the Yamaha MT-03?
How to Adjust the Time on the Yamaha MT-03?
Mt 03 In this tutorial, you will see how to adjust the time on the Yamaha MT-03, a very simple and quick operation to perform, for example, after disconnec…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos