Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil on a Yamaha V Star?

Model: Yamaha V Star 1300
Part: Engine oil

Video tutorial

To change the engine oil on a Yamaha V Star, start by ensuring the engine is cold. Lift the motorcycle using a centre or side stand to make it stable.

Remove the oil cap and the oil filter cap. Position a container under the sump to collect the used oil. Completely drain the used oil. Remove the oil filter using an appropriate tool. Clean the area around the filter and lubricate the new filter with clean oil before installing it. Replace the sump cap and the filter cap. Add new oil through the oil filler, following the specifications in the owner's manual for type and quantity.

Check the oil level with the dipstick and add oil if necessary. Start the engine and check for leaks.

Close the oil cap and clean up any spills.


Updated on 26 September 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Yamaha V Star 1300
How to replace the battery of the Yamaha V Star 1300
V Star 1300 Below we will see the main instructions on how to disassemble and replace the battery of the Yamaha V Star 1300 motorcycle, in simple steps. First, w…
How to replace the headlight bulb on a Yamaha V-Star 1300?
How to replace the headlight bulb on a Yamaha V-Star 1300?
V Star 1300 To replace the headlight bulb on a Yamaha V-Star 1300, you need to loosen the screws that secure the front fairing of the bike: these screws will be …
How do you set the clock on the Yamaha V-Star 1300?
How do you set the clock on the Yamaha V-Star 1300?
V Star 1300 It will be possible to adjust the clock of the Yamaha V-Star 1300 by inserting the ignition key into the ignition switch to turn on the dashboard: on…

How to Replace the Fuel Filter on the MV Agusta Brutale 920?

To replace the fuel filter on the MV Agusta Brutale 920, loosen the screws that secure the fuel tank to its housing: once the screws securing the tank, hoses, and connectors have been loosened, you can completely remove the tank and then locate the fuel pump underneath. At this point, loosen the screws that secure the pump, remove it, and locate the fuel filter attached to it: this will allow you to replace it by inserting the new replacement part.

Watch the video!


by ScegliAuto

More videos