Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha V Star 1300
Part: Clock

It will be possible to adjust the clock of the Yamaha V-Star 1300 by inserting the ignition key into the ignition switch to turn on the dashboard: once the dashboard is on, you can hold down the RESET and up arrow buttons on the right side of the handlebars. In this way, you will notice that the hours will flash and can be changed with the arrows; then you can press RESET again to change the minutes in the same way. At the end of the adjustment, you can confirm the change by pressing RESET again.

Posted on 8 June 2025 by ScegliAuto

Video tutorial

Related tutorials

How to set the clock on a Yamaha V-Star 1300?
How to set the clock on a Yamaha V-Star 1300?
V Star 1300 .. To set the clock on a Yamaha V-Star 1300, press and hold the RESET button and the SELECT button upwards, after turning on the ignition.. …
How to Adjust the Time on the Yamaha V Star 1300?
How to Adjust the Time on the Yamaha V Star 1300?
V Star 1300 .. will see how to adjust the time on the Yamaha V Star 1300, a very simple and quick operation to perform, for example, after disconnecting the battery.. …
How to replace the battery of the Yamaha V Star 1300
How to replace the battery of the Yamaha V Star 1300
V Star 1300 .. and replace the battery of the Yamaha V Star 1300 motorcycle, in simple steps. First, we put the motorcycle on the stand and start by removing.. …

How to Replace the Exhaust on the Benelli TRK 502X?

To replace the exhaust on the Benelli TRK 502X, you need to loosen the screws that secure the exhaust end can to its housing, located on the right side of the bike just below the mudguard. Once the support screws are loosened, widen the ring that connects the end can to the exhaust manifold. This will allow you to remove the old exhaust from its position and insert the new one. The new exhaust must be secured to its supports with the screws and connected to the manifold with the appropriate ring just removed.

Watch the video!


by ScegliAuto

More videos