Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To ensure that the motor oil of the Harley Davidson Softail is replaced, it will be necessary to loosen the drain plug located in the central lower part of the motorcycle, near the oil pan: once the plug has been unscrewed, it will be possible to collect the used oil in a properly positioned container. At this point, it will also be possible to remove the oil filter located in the lower part of the motorcycle to insert the new one. Finally, the oil must be topped up by inserting it through the vent on the right side.

Posted on 27 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Harley Davidson Softail
How to Change the Engine Oil and Oil Filter on a Harley Davidson Softail
Softail The following steps will guide you through performing routine maintenance by changing the engine oil and oil filter on a Harley Davidson Softail. Fir…
How to Change the Engine Oil on a Harley Davidson Softail
How to Change the Engine Oil on a Harley Davidson Softail
Softail Before you can start, position your Harley Davidson Softail upright, and then run the engine for a few minutes. Begin by unscrewing and removing the …
How to Replace the Gearbox Oil of the Harley Davidson Softail
How to Replace the Gearbox Oil of the Harley Davidson Softail
Softail In this guide, see how to replace the gearbox oil of the Harley Davidson Softail Breakout. First, remove the oil drain screw located under the engine…

How to Replace the Remote Battery in a Ducati

As shown in this tutorial, replacing the battery in the Ducati Monster 821 is an extremely simple and quick task. First, ensure the key is not inserted. Then locate the plastic cover at the bottom, just below the rear shock absorber, and remove it by unscrewing the respective side screws. If necessary, remove the seat to gain more working space. Once you have access to the battery, disconnect both terminals, support it through the indicated hole, and unscrew the lower fixing bolts. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos