Do it yourself
Frequently asked questions about cars and motorcycles
The following steps will guide you through performing routine maintenance by changing the engine oil and oil filter on a Harley Davidson Softail. First, place the motorcycle on a stand and begin unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, using the appropriate tool, unscrew the oil filter cartridge, hand-tighten the new one, and then gently tighten it. Finally, pour in the new engine oil until it reaches the maximum level mark.

Posted on 30 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Softail Before you can start, position your Harley Davidson Softail upright, and then run the engine for a few minutes. Begin by unscrewing and removing the …
Softail To ensure that the motor oil of the Harley Davidson Softail is replaced, it will be necessary to loosen the drain plug located in the central lower p…
Softail To change the engine oil on a Harley Davidson Softail, loosen the drain plug located at the central bottom of the bike: once it is unscrewed, ensure …

How to Dismantle the Engine of the KTM EXC 300

To dismantle the engine of the KTM EXC 300, remove the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is extracted, unscrew the bolts that secure the cylinder at its top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. You can now replace the necessary parts and subsequently reinstall the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos