Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Mt 03
Part: Engine oil

To change the motor oil of a Yamaha MT-03, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and place the motorcycle on a center stand to ensure stability. Locate the oil drain plug under the engine. Place a collection tray under the drain plug and use a wrench to unscrew the plug, allowing the oil to drain completely into the tray. Once all the oil has been drained, securely screw the drain plug back in. Find the oil fill cap, located on the side of the engine, and remove it. Use a funnel to slowly pour the recommended amount of new oil as stated in the owner's manual. After pouring the oil, replace the fill cap and tighten it securely. Start the engine and let it run for a few minutes, then turn it off and check for any oil leaks. This ensures that the new oil is evenly distributed in the engine and everything is in order.

Posted on 16 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to change the motor oil of a Yamaha MT 03?
How to change the motor oil of a Yamaha MT 03?
Mt 03 To change the motor oil of a Yamaha MT-03, start by putting the motorcycle on a stable stand. Start the engine for a few minutes to warm up the oil, …
How to Change the Engine Oil in a Yamaha MT-03?
How to Change the Engine Oil in a Yamaha MT-03?
Mt 03 In this tutorial, you will see how to change the engine oil in a Yamaha MT-03, a very simple and quick operation. First, ensure that the engine is co…
How to replace the motor oil in the Yamaha MT-03?
How to replace the motor oil in the Yamaha MT-03?
Mt 03 In this tutorial we can see how to replace the engine oil in the Yamaha MT-03, an extremely simple and quick operation. First of all, make sure that …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos