Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will discover the instructions that will allow us to disassemble and replace the spark plugs of the engine of the Yamaha Tenere 700 enduro motorcycle. First of all, we put the motorcycle on the central stand and start disassembling and removing the rider's seat and the fuel tank, unscrewing all the fixing screws and disconnecting the fuel line; then we disconnect the spark plug connectors and use a socket wrench with extension to avoid and remove them, as shown in the video. We install the new spark plugs, of the right type and with the same pitch, reassembling everything!

Posted on 17 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the sprocket of the Yamaha Ténéré 700?
How do you replace the sprocket of the Yamaha Ténéré 700?
Tenere 700 In order to replace the sprocket of the Yamaha Ténéré 700, you need to loosen the screws that secure the small panel on the left side of the motorcyc…
How to Set the Clock on a Yamaha Ténéré 700?
How to Set the Clock on a Yamaha Ténéré 700?
Tenere 700 You can adjust the clock on the Yamaha Ténéré 700 by turning on the ignition and inserting the key into the corresponding ignition switch. Once it is…
How to Replace the Mirrors on a Yamaha Ténéré 700?
How to Replace the Mirrors on a Yamaha Ténéré 700?
Tenere 700 To replace the mirrors on a Yamaha Ténéré 700, you will need to loosen the nuts that secure the mirrors to their housings on the sides of the handleb…

How to reset the oil light on the Honda SH 125

If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete.

Watch the video!


by ScegliAuto

More videos