Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. : Raider S
To change the motor oil of a Yamaha Raider S, start by warming up the engine for a few minutes to make the oil more fluid. Turn off the engine and put the motorcycle on a center stand to ensure stability. Find the oil drain plug located under the engine. Place a collection pan under the plug and use a wrench to unscrew it. Let the oil drain completely into the pan. Once all the oil has drained, securely screw the drain plug back in. Locate the oil fill cap, which is usually on the side of the engine, and remove it. Use a funnel to slowly pour the recommended amount of new oil as stated in the user manual. Make sure not to exceed the maximum level. After adding the oil, replace the fill cap and tighten it securely. Start the engine and let it run for a few minutes, then turn it off and check for any oil leaks.

Posted on 28 June 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on a Yamaha Raider?
How to Replace the Rear Brake Pads on a Yamaha Raider?
Raider S You can replace the rear brake pads on a Yamaha Raider by loosening the screws that secure the brake caliper to the corresponding disc, allowing you …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos