Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil in a Yamaha MT-09?

Model: Yamaha Mt 09
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in a Yamaha MT-09, a very simple and quick operation. First, ensure that the engine is cool enough, then place a container underneath the bike, locate the drain hole bolt, and unscrew it using a 17 mm socket.

Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement filter and the bolt. At this point, simply pour in the required amount of oil through the designated upper hole.


Updated on 10 October 2026 by ScegliAuto


Related tutorials

Mt 09 In this tutorial, you can see how to change the engine oil in the Yamaha MT-09, a very simple and quick operation. First, ensure that the engine is c…
Mt 09 .. This tutorial shows how to change the engine oil in a Yamaha MT-09, a very simple and quick operation. First, ensure that.. …
Mt 09 In this tutorial we can see how to replace the engine oil in the Yamaha MT-09, an extremely simple and quick operation. First of all, we wait for the…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos