Do it yourself
Frequently asked questions about cars and motorcycles

Model: Yamaha Mt 03
Part: Engine oil

In this tutorial we can see how to replace the engine oil in the Yamaha MT-03, an extremely simple and quick operation. First of all, make sure that the engine is sufficiently cold, then remove the lower fairing and place a container underneath the motorcycle. Next, locate the drainage hole bolt, unscrew it using a 12mm socket wrench and let all the oil contained in the system drain out. At this point, all that's left to do is to unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the appropriate hole.

Posted on 26 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Mt 03 To change the engine oil on the Yamaha MT-03, you need to unscrew the bolts securing the engine guard located at the bottom of the bike. Once this is…
Mt 03 In this brief and simple guide, follow the steps to perform the routine maintenance service by replacing the engine oil and oil filter on the Yamaha …
Mt 03 Engine oil and the oil filter should be changed regularly to ensure proper engine function; here’s how to service the Yamaha MT-03. First, place the …

How to replace the coolant in the BMW S1000 R

Today, we will see in this video tutorial how to bleed and replace the coolant in the BMW S1000 R motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing, found at the bottom right; let the fluid drain into a container for about ten minutes. Now, unscrew the radiator cap and top up with the new coolant, the correct type for your radiator; fill it to the maximum level mark, starting the engine to circulate the fluid!

Watch the video!


by ScegliAuto

More videos