|
Do it yourself
| |||
| ||||
Model: Yamaha Mt 03
These short and simple instructions will guide us through the process of resetting the service maintenance light for the oil change on the Yamaha MT-03. First, we put the motorcycle on the stand and start by pressing and holding the right button on the instrument panel (we will see the oil light flashing); we will find the service kilometers we want to reset below. At this point, we press the left button to confirm and perform the reset of the oil light, then we go back to the service kilometers to verify the actual reset!
Posted on 9 August 2024 by ScegliAuto
Video tutorial
Related tutorials
Mt 03
In this tutorial, we will see how to reset the oil service indicator on the Yamaha MT-03, a very simple and quick operation that should be done only …
Mt 03
This guide shows how to remove and replace the headlight bulb on the Yamaha MT-03 motorcycle, following the instructions below. First, place your mot…
Mt 03
In this tutorial, you will see how to adjust the time on a Yamaha MT-03, a very simple and quick operation to perform, for example, after disconnecti…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
