Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Yamaha Virago 750, an extremely simple and fast operation. First of all, make sure that the engine is sufficiently cold, then position a container under the motorcycle and open the cap of the filling hole. Next, locate the drain hole bolt, unscrew it with a 19mm socket wrench, let all the oil in the system drain out, and open the filter housing. At this point, all that remains is to insert the replacement, reassemble everything, and pour in the new oil through the top hole.

Posted on 12 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs in the Yamaha Virago XV 750?
How to Replace the Spark Plugs in the Yamaha Virago XV 750?
Virago 750 In this tutorial, see how to replace the spark plugs in the Yamaha Virago XV 750, a very simple and quick operation. First, wait for the engine to co…
How to Replace the Clutch on a Yamaha Virago 750?
How to Replace the Clutch on a Yamaha Virago 750?
Virago 750 To replace the clutch on a Yamaha Virago 750, loosen the screws securing the cover located on the right side of the bike, in the lower central positi…
How to Change the Engine Oil in the Yamaha XV750 Virago?
How to Change the Engine Oil in the Yamaha XV750 Virago?
Virago 750 In this tutorial, see how to change the engine oil in the Yamaha XV750 Virago, a very simple and quick operation. First, ensure the engine is cool en…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos