Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 206
  6. : Cabin air filter

Peugeot 206 - Cabin air filter

Peugeot 206 (1998-2012 / MK 1)
Replacement of the cabin air filter of the Peugeot 206.

To prevent dirt and dust from entering the air conditioning system of the Peugeot 206, a special filter is provided on the intake, which needs to be replaced …read all…
Posted on 17 January 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the cabin filter of the Peugeot 206?

To successfully and safely replace the cabin air filter on your 2006 Peugeot 206, simply follow the steps described in this new mini guide. First, turn off the …read all…
Posted on 8 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the pollen filter on a Peugeot 206.

In this video tutorial, we can see how to replace the pollen filter on a Peugeot 206. The first thing we need to do is purchase a new pollen filter. The next …read all…
Posted on 4 May 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Cabin filter replacement on Peugeot 206

Open the front hood by placing the appropriate support rod. Always work with the handbrake on. The cabin filter, on almost all car models and also on this one, …read all…
Posted on 24 March 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to replace the air conditioner pollen filter.

Open the engine compartment hood. Identify the position of the cabin air filter housing which, in this case, is located in the upper left part of the engine …read all…
Posted on 8 September 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Cabin air filter replacement

The passenger compartment air filter is located in the engine compartment, on the passenger side, immediately under the windscreen, behind the shock absorber …read all…
Posted on 16 August 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Replacement of cabin air filter

The cabin air filter is located just below the windshield, on the passenger side, behind the shock absorber dome. To access the filter compartment, remove any …read all…
Posted on 9 November 2023 by ScegliAuto

Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (9) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (56) Dashboard (2) Bearing (2) Brake discs (2) Side indicator light (1) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Handle (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (8) Door panel (23) Front bumper (4) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (35) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos