Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Peugeot
  4. :
  5. 206
  6. : Front bumper

Peugeot 206 - Front bumper

Peugeot 206 (1998-2012 / MK 1)
How to remove the front bumper of the Peugeot 206

These brief instructions will guide us through the process of disassembling and replacing the front bumper of the Peugeot 206. First, we open the hood of the …read all…
Posted on 28 May 2024 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to remove the front bumper in the Peugeot 206?

In this tutorial we can see how to remove the front bumper in the Peugeot 206. For this simple operation we need: a 10mm socket wrench, a T20 Torx wrench, …read all…
Posted on 29 October 2022 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
How to remove the Peugeot 206 front bumper

Does the front bumper of the Peugeot 206 need to be changed? Let's see how to remove the bumper. Let's lift the bonnet and put it in safety. We remove the trim …read all…
Posted on 4 December 2023 by ScegliAuto
Peugeot 206 (1998-2012 / MK 1)
Front bumper replacement

In order to replace the front bumper, it is first of all suggested to place the car on suitable car stands and remove the front wheel; then start by …read all…
Posted on 18 August 2023 by ScegliAuto

Cigarette Lighter (2) Airbags (6) Alternator (6) Loudspeaker (3) Shock absorbers (3) Antenna (2) Air conditioning (1) Car stereo (11) Anti roll bar (1) Roof Rack Bars (1) Battery (9) Coil (3) Air Vents (4) Bushings (1) Arm (2) Gearbox (6) Spark plugs (7) Glow plugs (2) Soft top (4) Carburetor (1) Bodywork (1) Control unit (4) Key (16) Locking the trunk (1) Timing belt (17) V-belt (4) Air conditioning (1) Air conditioning controls (2) -board computer (10) Checks and maintenance (56) Dashboard (2) Bearing (2) Brake discs (2) Side indicator light (1) Headlight (15) Tail light (5) Fog lights (4) Air filter (11) Cabin air filter (7) Petrol filter (5) Diesel filter (9) Oil filter (7) Hand brake (2) Clutch (5) Injectors (6) Reverse gear switch (1) Accessory Kit (1) Light bulb (7) Side turn signal light bulb (1) Headlight bulb (18) Rear light bulb (8) Interior lights ceiling light bulb (3) Antifreeze liquid (1) Dashboard light (14) License plate light (3) Third brake light (1) Handle (1) Muffler (1) Mask (1) Engine (1) Window motor (1) Starter motor (8) Gear oil (3) Engine oil (8) Door panel (23) Front bumper (4) Rear bumper (2) Brake pads (4) Tires (2) Gear Shift Knob (11) Pump (7) Fuel pump (13) Door (2) Push button (1) Window lift button (3) Instrument cluster (15) Radiator (5) Passenger compartment heating radiator (6) Wheel (4) Fuse box (35) Seat (9) Drive shaft (1) Crankshaft RPM sensor (1) Coolant temperature sensor (3) Lock (1) Lambda sensor (1) Suspensions (3) Outside rearview mirror (13) Interior rearview mirror (2) Windscreen wipers (1) Thermostat (2) Engine head (4) Steering rods (1) Central tunnel (1) Valve (1) EGR valve (1) Interior blower (5) Steering wheel (5)

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos