Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Acura
    3. :
  3. Ilx
    4. : How to fix the seat belt that does not roll back on your Honda Acura Ilx

Acura Ilx - Video tutorial

Model: Acura Ilx MK 1 - Years 2013-2022
Operation: How to fix the seat belt that does not roll back on your Honda Acura Ilx

If the seat belts on your Honda Acura Ilx no longer retract, or have a hard time retracting, it is almost certainly because they are dirty. Maybe you can't see it, they are gray and you don't notice the dirt on the gray, but that's exactly why they struggle to roll up. Then the best way is to wash them. Take a large bucket full of hot water and a neutral detergent that may not foam too much. Place it on the seat next to the offending seat belt, after placing a large terry towel on the seat to prevent it from getting wet, pull out the entire seat belt and keep it locked with a plastic spatula. Immerse the seat belt in the bucket and let it soak for about twenty minutes. Then rub a little, rinse with a sponge and dry well with another towel. You will see that the belt will now re-roll smoothly.


Posted on 27 July 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos