Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on a 2014 Acura ILX?

Model: Acura Ilx MK 1 - Years 2013-2022
Part: Service warning light

Once the inspection, or service, is complete, you can reset the service light. In the 2014 Acura ILX, this is done by turning on the ignition and navigating through the display tabs until you reach the one that says "customize settings." Select it with the "select" button, then go to "Maintenance info" and do the same. With the same button, you can now confirm the reset of the service light by selecting the "Oil life reset" option. Exit the menu and turn off the ignition. The reset has been successful, and you can verify it by turning the ignition back on.

Updated on 5 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Acura Ilx (2013-2022 / MK 1) These brief instructions will allow us to disassemble and replace the cabin air filter or pollen filter of the Acura ILX. First, we get on board the …
Acura Ilx (2013-2022 / MK 1) To replace the air filter on an Acura ILX, open the hood to access the components inside the engine compartment. In the upper right part of the engin…
Acura Ilx (2013-2022 / MK 1) To replace the headlight bulb of the Acura ILX, open the hood to access the components inside the engine compartment. Once the hood is open, remove t…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos