Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to open the locked fuel door on the Acura MDX?

Model: Acura Acura Various
Part: Fuel cap

In the Acura MDX, it may happen that the fuel door gets stuck or shows signs of malfunction, for example due to a fault in the control button or the lock actuator. In these cases, it is possible to perform an emergency opening following the simple procedure shown in this tutorial. First, we open the rear hatch, then we locate the panel on the left wall of the trunk and remove it. We then grip the end of the actuator and pull it downwards to open the fuel door. At this point, we can either refuel or repair the faulty element.

Posted on 25 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Battery in My Acura MDX Key Fob
Replacing the Battery in My Acura MDX Key Fob
Acura Acura Various Today, discover the procedure to dismantle and replace the battery in the remote key fob of the Acura MDX. First, take your remote and remove the phy…
How to replace the battery in the Acura MDX key.
How to replace the battery in the Acura MDX key.
Acura Acura Various If the key of your Acura MDX has suddenly stopped working due to a completely drained battery, then you must follow the following steps in order to r…
How to Reset the Service Light (Oil Change) on an Acura MDX
How to Reset the Service Light (Oil Change) on an Acura MDX
Acura Acura Various Today's information will allow us to reset the maintenance reminder for the engine oil change (service) on an Acura MDX. First, get into the vehicle …

How to Remove the Front Bumper of the Citroën C4 Picasso?

To remove the front bumper of the Citroën C4 Picasso, you need to take out all the rivets and screws that secure the piece to its housing: these screws are located inside the wheel arches of the front wheels and at the central upper part of the bumper itself. Once all these fastening elements have been removed, you can detach the bumper from its seat by disconnecting the connectors inside and then insert the new replacement part. The new part can then be secured and connected properly, ensuring it is correctly fixed in place.

Watch the video!


by ScegliAuto

More videos