|
Do it yourself
| |||
| ||||
How to reset the service light on the Alfa Romeo Stelvio
Model: Alfa Romeo Alfa Romeo Stelvio
MK 1
- Years:
2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Video tutorial
Today we will explain how to reset the service light, related to the car service on an Alfa Romeo Stelvio vehicle. To perform this operation, we need to get into the vehicle and turn on the instrument panel immediately after we should press the accelerator pedal three times. Each time the pedal is pressed it must be at a distance of five seconds from each other. After these steps, we should turn off the instrument panel and then turn it on again to see if the operation was successful. If it is necessary to repeat the operation, make sure to do it only one more time if the problem persists, as it may be necessary to go to a garage for a computerized diagnosis.
Posted on 2 May 2025 by ScegliAuto
Related tutorials
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
It will be possible to perform the reset procedure of the Service light that is shown on the instrument panel of the Alfa Romeo Stelvio by connecting…
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
Follow these steps to reset the engine oil maintenance light on your Alfa Romeo Stelvio. First, get in the vehicle and press and hold the brake pedal…
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
In this brief guide, you will find instructions on how to perform routine maintenance and reset the engine oil light on the Alfa Romeo Stelvio, as we…
Other guides you may be interested in
|
Frequently Asked QuestionsHow to Replace the Starter Motor on an Opel Corsa?
In this tutorial, you will see how to replace the starter motor on an Opel Corsa C, a relatively simple task if you have good manual skills. First, open the bonnet, then disconnect the negative terminal of the battery to work safely. Next, locate the device at the rear of the engine, remove the intake manifold, and unscrew the two nuts from the power terminals. At this point, you can unscrew the mounting bolts of the starter motor, separate it from the engine, and install the replacement by following the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
