|
Do it yourself
| |||
| ||||
How to reset the service light on an Alfa Romeo Stelvio (from 2020 onwards)
Model: Alfa Romeo Alfa Romeo Stelvio
MK 1
- Years 2016-2024
In this video, we see how to reset the service light on an Alfa Romeo Stelvio restyling from 2020 onwards: we always start with the fact that all doors, the rear trunk, and the hood must be closed, then with the car turned off, we press and hold down the accelerator pedal. In the meantime, we press the brake pedal six times. On the sixth press, we must hold down the brake pedal for about ten seconds, while also keeping the accelerator pedal pressed. After this time, we release the brake pedal and then the accelerator pedal. Now we turn on the instrument panel and see that the light has been reset. It is very important to follow the timing and sequence of the various presses, otherwise the operation will not succeed.
Posted on 28 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
In order to reset the Service light of the Alfa Romeo Stelvio, you must turn on the instrument panel by inserting the ignition key into the appropria…
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
The procedure to reset the service light on the Alfa Romeo Stelvio is very simple and is done directly from the instrument cluster display, without t…
Alfa Romeo Alfa Romeo Stelvio
(2016-2024 /
MK 1)
The Service light that is shown on the instrument panel of the Alfa Romeo Stelvio can be reset by holding down the accelerator pedal and pressing the…
Other guides you may be interested in
|
How to Replace the External Wing Mirror on a Ford C MAX
In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.050
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
