Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. 147
    4. : Replacement of Alfa Romeo 147 front bulbs

Alfa Romeo 147 - Video tutorial

Model: Alfa Romeo 147 MK 1 - Years 2000-2010
Part: Light bulb
Operation: Replacement of Alfa Romeo 147 front bulbs

In this video tutorial we will see how to replace the bulbs of the Alfa Romeo 147. First we open the bonnet: to access the bulb, you don't have to disassemble anything as we already have everything at hand. Then remove the rubber protection by pulling: to remove the position light bulb we have to remove the two tabs and remove the 5w 5 volt type bayonet fitting bulb. Same thing for the low beam bulb: remove the tab and extract the bulb: in this case it is a halogen bulb with H1 12 volt 55 watt socket. Replace if you want it all!


Posted on 10 December 2023 by ScegliAuto

This video is currently unavailable


How to remove the front bumper of an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, we will have to open the front hood of our Alfa Romeo 147. So let's start by unscrewing and removing all the screws and all the bolt
Removing the Alfa Romeo 147 headlight
Alfa Romeo 147 (2000-2010 / MK 1) Today, in this video tutorial, we will see how to remove the headlights of the Alfa Romeo 147. We will see later in the video the disassembly of the
How to replace the Alfa Romeo 147 climate control light bulbs
Alfa Romeo 147 (2000-2010 / MK 1) We see in this guide the instructions that will allow us to remove and replace the air conditioning control bulbs of the Alfa Romeo 147, but also of

    Frequently Asked Questions

    • 147 2000-2010 - How is it to replace the headlight bulb of the Alfa Romeo 147? Read Answer
    • 147 2000-2010 - Where are the position lights of the Alfa Romeo 147 located? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos