Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Number Plate Light on Alfa Romeo 147

Model: Alfa Romeo 147 MK 1 - Years: 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: License plate light

Video tutorial

In this video tutorial, you will learn how to remove and replace the number plate bulbs on an Alfa Romeo 147, as well as on most models from the manufacturer. First, obtain the new bulbs to install and remove the number plate light cover by prying it with something thin in the designated hole on the cover; then remove the bulb holder from the cover and extract the old bulb, as shown in the video.

Finally, insert the new bulb and reassemble everything inside the cover, then secure it!


Updated on 4 May 2026 by ScegliAuto


Related tutorials

How to Remove the Front Bumper from an Alfa Romeo 147
How to Remove the Front Bumper from an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) Before starting, open the bonnet of your Alfa Romeo 147. Begin by unscrewing and removing all screws and bolts that secure the front bumper to the ch…
Where to Find the Fuse Box in an Alfa Romeo 147
Where to Find the Fuse Box in an Alfa Romeo 147
Alfa Romeo 147 (2000-2010 / MK 1) If you cannot find the location of the fuse box in your Alfa Romeo 147, simply follow this mini guide. First, enter the car (driver's side) and reach…
How to Replace the Brake Button on the Alfa Romeo 147?
How to Replace the Brake Button on the Alfa Romeo 147?
Alfa Romeo 147 (2000-2010 / MK 1) This video shows how to replace the handbrake lever button. The car used for this clip is an Alfa Romeo 147, but the same procedure applies to the Al…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos