Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Alfa Romeo
    3. :
  3. Alfa Romeo Gt
    4. : Replacement mirror and cap on Alfa Romeo GT and 147

Alfa Romeo Alfa Romeo Gt - Video tutorial

Model: Alfa Romeo Alfa Romeo Gt MK 1 - Years 2003-2010
Part: Outside rearview mirror
Operation: Replacement mirror and cap on Alfa Romeo GT and 147

To remove the glass of the external rear-view mirror you must use a plastic wedge and pry the rear part of the same, on the whole surrounding area, and it will slowly come out of its seat and disengage from the fixing clips. Once this is done, the mirror will have come out of the shell and you will have to disconnect the two small connectors with a flat head screwdriver. If, on the other hand, you have to completely replace the cap, you have to remove the plastic inside the passenger compartment, the one near the window, disconnect the connector and unscrew the three torx t40. Proceed backwards for the montages.


Posted on 24 January 2024 by ScegliAuto



How to replace the grille on the Alfa Romeo GT - 147
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) Let's find out in this guide how to remove and replace the front bumper grille of the Alfa Romeo GT, but also of the 147. First we open the engine ho
How to remove the washer fluid reservoir on the Alfa Romeo GT - 147
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) In this video tutorial we will see how to remove the windshield washer fluid reservoir on the Alfa Romeo GT, but also on the 147. First we open the b
Replace the inside door handle of the Alfa Romeo GT - 147
Alfa Romeo Alfa Romeo Gt (2003-2010 / MK 1) Let's see in this video how to remove and replace the internal door handle of the Alfa Romeo GT, but also of the 147. First we open the front door an

How do you replace the horn on the Citroà «n Berlingo?

In order to replace the horn on the Citroà «n Berlingo, the vehicle must be raised so that the screws that secure the left front wheel can be loosened and removed completely. Once this wheel has been removed, it will be possible to access the screws that secure the internal cover of the corresponding wheel arch: this will have to be detached and it will be possible to access the components inside, including the horn. This will need to be disconnected from its connector and removed from its holders, so that it can be replaced with a new spare part.

Watch the video!


by ScegliAuto

More videos