Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Door Window Regulator on the Alfa Romeo 159?

Model: Alfa Romeo 159 MK 1 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Checks and maintenance

Video tutorial

To replace the rear door window regulator on the Alfa Romeo 159, first remove the door panel. Once this is removed, loosen all the bolts securing the metal cover to which the window regulator is connected on its inner side.

Then, fit the new window regulator into the appropriate slots and secure it with the corresponding fixing bolts. At this point, you can reinsert the cover and secure it. By connecting the window regulator motor to the corresponding connector, you can check its proper operation.


Updated on 22 April 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Window Regulator of the Alfa Romeo 159?
How to Replace the Rear Window Regulator of the Alfa Romeo 159?
Alfa Romeo 159 (2005-2011 / MK 1) To replace the window regulator of the Alfa Romeo 159, unscrew the screws that secure the panel to the door: these screws are located near the window…
How to Remove the Rear Door Panel on the Alfa Romeo 159
How to Remove the Rear Door Panel on the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) In this video tutorial, learn how to remove the rear door panel and window mechanism on the Alfa Romeo 159 in simple steps. First, open the rear door…
How to Remove the Door Panel and Window Mechanism on the Alfa Romeo 159
How to Remove the Door Panel and Window Mechanism on the Alfa Romeo 159
Alfa Romeo 159 (2005-2011 / MK 1) This guide provides the main instructions to remove and replace the door panel and window mechanism on the Alfa Romeo 159. First, open the driver's s…

    Frequently Asked Questions

    • 159 2005-2011 - What are the problems with the 1750 TBI engine? Read answer

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos