Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel in the Alfa Romeo Giulietta?

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Door trim panel

Video tutorial

In this tutorial, you will see how to remove the rear door panel in the Alfa Romeo Giulietta. First, using a plastic spatula, remove the front cover of the grab handle, then unscrew the 2 indicated screws.

Next, remove the small panel inside the opening handle, unscrew the screw underneath, and unclip the lower light, disconnecting its connector afterwards. Finally, remove the door control console and, using the spatula, lever along the lower edge of the panel to unclip it from the door.


Updated on 23 May 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Unlike many other car models, the air filter of the Alfa Romeo Giulietta is not located in the upper area of the engine bay but rather in the lower a…
Disassembly of the rear door panel of the Alfa Romeo Giulietta
Disassembly of the rear door panel of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Today we will discover the instructions that will allow us to disassemble the rear door panel and the internal handle of the Alfa Romeo Giulietta. Fi…
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
How to Reset the Oil Change Light on an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Before starting, sit in the driver's seat of your Alfa Romeo Giulietta. Insert and turn the key in the ignition. Next, press and hold the accelerator…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos