Do it yourself
Frequently asked questions about cars and motorcycles

Disassembly of the rear door panel of the Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Door trim panel

Today we will discover the instructions that will allow us to disassemble the rear door panel and the internal handle of the Alfa Romeo Giulietta. First of all, we open the rear door and start by removing the plastic cover of the handle; then we unscrew the screw that we find on the opening handle, as shown in the video. At this point, we unscrew the additional screws located under the handle, then lever on the sides of the panel to detach and remove it; finally, disconnect the cable of the opening handle, applying the reverse procedure for reassembly!

Posted on 5 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Alfa Romeo Giulietta (2010-2020 / MK 1) In this tutorial, you will see how to remove the rear door panel in the Alfa Romeo Giulietta. First, using a plastic spatula, remove the front cover …
Alfa Romeo Giulietta (2010-2020 / MK 1) In this brief and simple guide, follow the steps to remove and replace the front door panel of the Alfa Romeo Giulietta. First, open the front door a…
Alfa Romeo Giulietta (2010-2020 / MK 1)

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos