Do it yourself
| ||||
|
Alfa Romeo Giulietta - Video tutorial
Model: Alfa Romeo Giulietta
MK 1
- Years 2010-2020 The operation shown and verbally described in this video explains how to reset the service light, using a special program, to be used on a personal computer. When the instrument panel is turned on, you will notice on the display, in the center of the dashboard, the warning message for the service to be carried out and the relative red oil warning light flashing. Now, via the serial cable, connect the PC to the car socket and proceed as follows: Switch off the ignition and select the car model first, then the engine and wait for the connection. Then, connected to the car control unit, you write the date of the last service performed and how many km to carry out the next. The PC is disconnected, the instrument panel is turned on and the operation is complete, as confirmed by the absence of the warning message for the coupon to be carried out and the flashing of the oil warning light.
Posted on 16 September 2022 by ScegliAuto
How do you reset the Alfa Romeo Giulietta service warning light?
Alfa Romeo Giulietta (2010-2020 / MK 1) The Alfa Romeo Giulietta Service warning light cannot be reset simply by navigating through the menu on the display. In order to reset the warning li
How to reset the Alfa Romeo Giulietta service light
Alfa Romeo Giulietta (2010-2020 / MK 1) Let's find out in this guide how to reset the Alfa Romeo Giulietta ordinary maintenance oil change service light. First of all we go to equip ourselv
How do you reset the Alfa Romeo Giulietta Service light?
Alfa Romeo Giulietta (2010-2020 / MK 1) In order to reset the Alfa Romeo Giulietta Service light, there are no procedures that can be performed from the car's on-board computer; in fact, to Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the oil service in the Fiat Toro?In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |