Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning on an Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tire pressure warning light

Video tutorial

To reset the tyre pressure warning on an Alfa Romeo Giulietta, first ensure all tyres are inflated to the correct value indicated in the manual or on the vehicle's label. When the pressures are correct, turn on the ignition without starting the engine and check that the display shows the message "Check Tyre Pressure" with the relevant icon.

At this point, on the left side of the dashboard, near the light controls, locate the button with the tyre symbol and the word "SET". Press and hold this button to confirm the system reset. After resetting, the display updates the pressure monitoring and the TPMS warning disappears, turning off the corresponding light.

If the message remains active, recheck the pressures or check the status of the sensors.


Posted on 28 May 2026 by ScegliAuto


Related tutorials

Resetting Tyre Pressure Warning Light on Alfa Romeo Giulietta
Resetting Tyre Pressure Warning Light on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial, you will learn how to reset the tyre pressure warning light on an Alfa Romeo Giulietta. Before performing the reset, ensure t…
Resetting the Tyre Pressure of an Alfa Romeo Giulietta
Resetting the Tyre Pressure of an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) The video shows how to reset the tyre pressure of an Alfa Romeo Giulietta. This is a straightforward but important task that takes a few minutes and …
How to Reset the Tyre Pressure Light in an Alfa Romeo Giulietta
How to Reset the Tyre Pressure Light in an Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) Below are the instructions that will allow you to reset the tyre pressure light in an Alfa Romeo Giulietta; before recalibrating the TPMS sensors, it…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos