Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Brake Pads on an Alfa Romeo Giulietta

Model: Alfa Romeo Giulietta MK 1 - Years 2010-2020
Part: Brake pads

To replace the rear brake pads on an Alfa Romeo Giulietta, lift the rear of the car with a jack and remove the wheel bolts to take off the wheel. Once the wheel is removed, unscrew the rear bolts holding the brake caliper (hold the nut with a spanner and unscrew the bolts with a socket wrench). Remove the rear caliper and disconnect the wear sensor cable. Using an Allen key, unscrew the caliper/pad support. Now take the caliper, retract the piston using a special tool, take the support, fit the new pad clips, and screw it to the disc (you may apply sealant on the end of the bolt). Position the new pads, ensuring the one with the wear sensor is at the back, then position the brake caliper, screw in the bolts (apply sealant on the end of the bolt) using the spanner and socket wrench. Finally, replace the wheel and tighten the bolts.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Discs of the Alfa Romeo Giulietta
Replacing the Rear Brake Discs of the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) This guide shows how to remove and replace the rear brake discs and pads of the Alfa Romeo Giulietta in simple steps. First, lift the vehicle and rem…
How to Replace the Front Brake Discs and Pads on the Alfa Romeo Giulietta
How to Replace the Front Brake Discs and Pads on the Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this video tutorial, you will see how to remove and replace the entire braking system, including the front brake discs and pads, on the Alfa Romeo…
Replacing the Third Brake Light on Alfa Romeo Giulietta
Replacing the Third Brake Light on Alfa Romeo Giulietta
Alfa Romeo Giulietta (2010-2020 / MK 1) In this short video tutorial, you will see all the steps needed to replace the third brake light on an Alfa Romeo Giulietta. First, open the boot of …

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos