Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Clutch Maintenance

Model: Alfa Romeo 155 MK 1 - Years 1992-1998
Part: Clutch

The video shows how to replace the worn clutch bearing on your Alfa Romeo 155. This maintenance operation is not routine and mainly depends on the age of the vehicle. As illustrated in the guide, you need a good amount of dexterity and plenty of patience. Using a simple small flathead screwdriver, lever it until you can extract the worn bearing. At this point, you can proceed with the replacement with the new part and finally reassemble everything. In some cases, it is advisable to consult qualified personnel.

Updated on 2 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Clutch Pump on an Alfa Romeo 155?
How to Replace the Clutch Pump on an Alfa Romeo 155?
Alfa Romeo 155 (1992-1998 / MK 1) To replace the clutch pump on an Alfa Romeo 155, open the bonnet to access the engine bay. You will need to loosen the screws securing the pump from …
Replacement of the steering tie rods of the Alfa Romeo 155.
Replacement of the steering tie rods of the Alfa Romeo 155.
Alfa Romeo 155 (1992-1998 / MK 1) The main instructions provided in this guide will show us how to disassemble and replace the steering tie rods of the Alfa Romeo 155. First, let's li…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos