Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Set the Clock on the Aprilia SR 160?

Model: Aprilia Sr 160
Part: Clock

Video tutorial

To adjust the clock on the Aprilia SR 160, turn the ignition key in the corresponding ignition switch to power up the instrument panel. Once the panel is on, press and hold the V button located to the right of the instrument panel until the hours on the clock start to flash.

By repeatedly pressing the button, you can change the hours; then press and hold the V button again until the minutes start to flash. You can now change the minutes in the same way, then turn off the ignition.


Updated on 29 October 2026 by ScegliAuto


Related tutorials

How do you replace the air filter of the Aprilia SR 160?
How do you replace the air filter of the Aprilia SR 160?
Sr 160 The air filter of the Aprilia SR 160 can be replaced by loosening the screws that secure the filter box to its housing, located next to the rear whee…
How to disassemble the front panel of the Aprilia SR 160
How to disassemble the front panel of the Aprilia SR 160
Sr 160 In this guide, we will see the steps that will allow us to disassemble the panel or front fairing of the Aprilia SR 150 scooter. First of all, we put…
How to Change the Engine Oil on the Aprilia SR 160 Scooter?
How to Change the Engine Oil on the Aprilia SR 160 Scooter?
Sr 160 In this tutorial, learn how to change the engine oil on the Aprilia SR 160 scooter, a very simple and quick operation to perform every 12 months. Fir…

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos