Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the front panel of the Aprilia SR 160

Model: Aprilia Sr 160
Part:

Video tutorial

In this guide, we will see the steps that will allow us to disassemble the panel or front fairing of the Aprilia SR 150 scooter. First of all, we put the scooter on the center stand and start by unscrewing the screws of the side fairings, in order to remove them; we find additional screws under the front panel and on the wheel arch, using a crosshead screwdriver to remove them, as shown in the video.

At this point, we gently detach the front panel, removing it and replacing it if necessary with a new one; we reassemble the new fairings in order, applying the reverse process!


Posted on 9 January 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Aprilia SR 160 Scooter?
How to Change the Engine Oil on the Aprilia SR 160 Scooter?
Sr 160 In this tutorial, learn how to change the engine oil on the Aprilia SR 160 scooter, a very simple and quick operation to perform every 12 months. Fir…
How do you replace the air filter of the Aprilia SR 160?
How do you replace the air filter of the Aprilia SR 160?
Sr 160 The air filter of the Aprilia SR 160 can be replaced by loosening the screws that secure the filter box to its housing, located next to the rear whee…
How to Set the Clock on the Aprilia SR 160?
How to Set the Clock on the Aprilia SR 160?
Sr 160 To adjust the clock on the Aprilia SR 160, turn the ignition key in the corresponding ignition switch to power up the instrument panel. Once the pane…

How to Change the Gear Oil on a Vespa 125 LX?

To change the gear oil on a Vespa 125 LX, unscrew the drain plug of the reservoir that contains the oil: this is located at the lower rear of the transmission casing, on the left side of the bike near the rear wheel. Once the drain plug is removed, collect the oil in a container until it is empty. At this point, top up through the breather located at the rear of the bike by adding the necessary amount of oil and then close the plug.

Watch the video!


by ScegliAuto

More videos