Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this video we can see how to deactivate the ABS function if we wish, on our Aprilia SX125: every time the engine is turned off, the ABS resets to ON. To deactivate the ABS we must start the engine, then with the engine running, we must hold down the start button until it stops flashing. The ABS is then deactivated. To activate the ABS, just turn off the engine and turn it back on: the ABS light flashes, which means it is activated. To change the indication from miles per hour to kilometers per hour, at start-up we must hold down the button until the display shows the word "code". Hold down the button and then turn on the dashboard. Enter code 300 to convert from mph to km/h and code 301 to convert from km/h to mph.

Posted on 14 August 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Disable the ABS on an Aprilia SX 125?
How to Disable the ABS on an Aprilia SX 125?
Sx 125 This guide provides instructions on how to disable the ABS on the Aprilia SX 125 motorcycle; remember that ABS should not be disabled to avoid compro…
How to Adjust the Clock on an Aprilia SX 125
How to Adjust the Clock on an Aprilia SX 125
Sx 125 Here are the steps to adjust the clock on the Aprilia SX 125 enduro bike. First, place your bike on the stand and turn on the instrument panel by tur…
How to replace the indicators on an Aprilia SX 125
How to replace the indicators on an Aprilia SX 125
Sx 125 This guide will show you how to remove and replace the indicator lights on the Aprilia SX 125 motorcycle. First, place the motorcycle on a stand and …

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos