Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the indicators on an Aprilia SX 125

Model: Aprilia Sx 125
Part: Light bulb

Video tutorial

This guide will show you how to remove and replace the indicator lights on the Aprilia SX 125 motorcycle. First, place the motorcycle on a stand and disconnect the electrical connectors of the indicators; then, unscrew the nuts from the brackets to detach them from the bodywork (or from the number plate holder if replacing the rear ones), as illustrated in the video.

At this point, install the new indicators compatible with your motorcycle, connect the electrical wiring, and ensure the cables are not left too loose, following the video tutorial to the end!


Updated on 20 July 2026 by ScegliAuto


Related tutorials

How to Replace the Indicators on the Aprilia SX 125
How to Replace the Indicators on the Aprilia SX 125
Sx 125 This guide provides instructions to remove and replace the bulbs of the indicators on the Aprilia SX 125 motorcycle. First, place your motorcycle on …
How to Replace the Rear Wheel of the Aprilia SX 125
How to Replace the Rear Wheel of the Aprilia SX 125
Sx 125 Follow these instructions to remove and replace the rear wheel or tyre of the Aprilia SX 125 enduro bike. First, place the rear stand to lift the whe…
How to Adjust the Clock on an Aprilia SX 125
How to Adjust the Clock on an Aprilia SX 125
Sx 125 Here are the steps to adjust the clock on the Aprilia SX 125 enduro bike. First, place your bike on the stand and turn on the instrument panel by tur…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos