Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Wheel of the Aprilia SX 125

Model: Aprilia Sx 125
Part: Wheel

Video tutorial

Follow these instructions to remove and replace the rear wheel or tyre of the Aprilia SX 125 enduro bike. First, place the rear stand to lift the wheel off the ground, then undo the screws of the rear brake caliper and remove it from the disc.

Next, unscrew the central axle of the wheel to remove it, disconnecting the chain from the sprocket as shown in the video. At this point, you can replace the brake disc, wheel bearing, or tyre if necessary; apply the reverse procedure for reassembly!


Updated on 23 September 2026 by ScegliAuto


Related tutorials

How to replace the indicators on an Aprilia SX 125
How to replace the indicators on an Aprilia SX 125
Sx 125 This guide will show you how to remove and replace the indicator lights on the Aprilia SX 125 motorcycle. First, place the motorcycle on a stand and …
How to Adjust the Clock on an Aprilia SX 125
How to Adjust the Clock on an Aprilia SX 125
Sx 125 Here are the steps to adjust the clock on the Aprilia SX 125 enduro bike. First, place your bike on the stand and turn on the instrument panel by tur…
How to Replace the Exhaust End Can on an Aprilia SX 125 2018
How to Replace the Exhaust End Can on an Aprilia SX 125 2018
Sx 125 In this video tutorial, you will see how to remove and replace the exhaust end can on an Aprilia SX 125 from 2018 by following these simple steps. Fi…

How to Replace the Headlamp Bulb on the Harley Davidson Road King?

To replace the headlamp bulb on the Harley Davidson Road King, you need to loosen the screw located at the bottom of the chrome trim around the headlamp: once this screw is removed, you can widen the chrome and completely remove it. This will allow you to extract the headlamp from its housing and remove the bulb inside; after removing the old bulb, you can insert and connect the new one to its housing, securing everything with the screw you just removed.

Watch the video!


by ScegliAuto

More videos