Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust End Can on an Aprilia SX 125 2018

Model: Aprilia Sx 125
Part: Exhaust muffler

Video tutorial

In this video tutorial, you will see how to remove and replace the exhaust end can on an Aprilia SX 125 from 2018 by following these simple steps. First, unscrew the fixing screws of the side fairing located above the end can; then remove the bolts securing the silencer bracket to detach it, as shown in the video.

At this point, insert the adapter for the new exhaust end can and install the exhaust correctly using the screws from the supplied kit; follow the video to the end for complete reassembly!


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to replace the indicators on an Aprilia SX 125
How to replace the indicators on an Aprilia SX 125
Sx 125 This guide will show you how to remove and replace the indicator lights on the Aprilia SX 125 motorcycle. First, place the motorcycle on a stand and …
How to Replace the Indicators on the Aprilia SX 125
How to Replace the Indicators on the Aprilia SX 125
Sx 125 This guide provides instructions to remove and replace the bulbs of the indicators on the Aprilia SX 125 motorcycle. First, place your motorcycle on …
How to Adjust the Clock on an Aprilia SX 125
How to Adjust the Clock on an Aprilia SX 125
Sx 125 Here are the steps to adjust the clock on the Aprilia SX 125 enduro bike. First, place your bike on the stand and turn on the instrument panel by tur…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos