Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Kymco Xciting 250 R?

Model: Kymco Xciting 250 R
Part: Engine oil

Video tutorial

To change the engine oil on the Kymco Xciting 250 R, unscrew the oil drain plug located at the central lower part of the bike. This allows you to collect all the used oil in a suitably positioned container.

Next to the drain plug, you will also find the oil filter, which can be removed from its housing and replaced with a new spare part. After replacement, top up the oil by pouring the new oil through the breather located on the left side of the vehicle.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Kymco Xciting 250 R?
How to Change the Engine Oil on the Kymco Xciting 250 R?
Xciting 250 R To replace the engine oil on the Kymco Xciting 250 R, first remove the oil drain plug located at the central bottom of the vehicle. This will allow y…
How to Change the Gear Oil of the Kymco Xciting 250
How to Change the Gear Oil of the Kymco Xciting 250
Xciting 250 R To change the gear oil of the Kymco Xciting 250, loosen the screws securing the drain plug of the transmission casing, which contains the gear oil: o…
How to Replace the Air Filter on the Kymco Xciting 250?
How to Replace the Air Filter on the Kymco Xciting 250?
Xciting 250 R To replace the air filter on the Kymco Xciting 250, open the under-seat compartment to access the internal part of this area. All screws securing the…

How to Dismantle the Centre Fairing of the Piaggio MP3

Below are the instructions to dismantle and replace the centre fairing of the Piaggio MP3 500 and 250 scooter. First, place the scooter on its stand and start by removing the small side plastic cover, unscrewing the fixing screws located underneath. Then, remove the fuel cap and disconnect the centre fairing by unplugging the electrical connector found underneath, as shown in the video. At this point, replace and install the new fairing, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos