Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil of an Aprilia RS 457?

Model: Aprilia Rs 457
Part: Engine oil

Video tutorial

To change the oil of an Aprilia RS 457 motorcycle, start by placing the bike on a stable stand to keep it upright. With the engine off and preferably slightly warm, locate the oil drain plug located at the bottom of the engine.

Use a wrench to unscrew the plug and let the old oil drain completely into a suitable container. Make sure you have a large enough pan to collect all the used oil. Once all the oil has been drained, screw the drain plug back in, tightening it carefully to avoid leaks.

Next, locate the fill plug, usually located on the top of the engine. Fill with new oil, being careful to pour the correct amount indicated in the motorcycle's user manual.

It is essential to use an oil suitable for the manufacturer's recommended specifications. After completing the filling, start the engine for a few minutes, checking for leaks and verifying the level with the dipstick.


Posted on 26 September 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Aprilia RS 457
How to Change the Engine Oil on the Aprilia RS 457
Rs 457 You can change the engine oil on the Aprilia RS 457 by loosening the drain plug on the oil sump located at the central lower part of the vehicle. Onc…
How to Change the Engine Oil on an Aprilia RS 457?
How to Change the Engine Oil on an Aprilia RS 457?
Rs 457 To change the engine oil on an Aprilia RS 457, first warm up the engine for a few minutes to make the oil more fluid. Turn off the engine and place t…
How to Change the Engine Oil of an Aprilia RS 457?
How to Change the Engine Oil of an Aprilia RS 457?
Rs 457 To change the engine oil of an Aprilia RS 457, start by positioning the bike on a central or side stand for stability. Ensure the engine is warm but …

How to Replace the Suspension Spring on a Husqvarna FC 450

Today, we will see the instructions that will allow you to dismantle and replace the suspension spring of the Husqvarna FC 450 enduro bike. First, position the bike on a stand and start disconnecting the rear swingarm from the suspension by unscrewing the lower pin and disconnecting the linkage; this will allow you to work on the suspension by unscrewing the collar to remove the spring, as shown in the video. At this point, install the new suspension spring, compatible with the original; reassemble the suspension and rear swingarm, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos